I believe in experiment. In life we have ups & downs, good times & bad. Each day will bring new opportunities if you look for it
The Shelly Wall Display can also be used conveniently as a desktop or table-top device with a simple 3D-printed stand, removing the need for permanent wall mounting. The holder is…
Setting up Home Assistant on a Raspberry Pi 5 with an NVMe SSD involves a two-step process. First, we use an SD card to update the firmware, then install Home…
I am use LocalTuya to control Deta grid connect Fan and Light switch (6914HA) inside home assistant. Fan setting:
I have setup few home automation using Home assistant in few of my friends places. I was really happy with the Deta grid connect products. My preferred framework was Tasmota…
I talked about earlier that DETA smart products (Tuya products) start replacing espressif esp32/esp8266 chipset with different chipset. As a result we can not flash our devices with opensource firmware…
In my previous discussion I wanted to install Home Assistant on Raspberry pi cm4 module. Due to supply shortage I was not able to do the installation. But this changed…